iOptron 8032 - Manual (Page 2)

MiniPier 8032
iOptron
®
MiniPier is designed for iOptron GOTO mounts, which includes iEQ45, iEQ30
1
,
MiniTower, MiniTower II, or MiniTower Pro mount. It can be used with a MiniTower,
MiniTower Pro, or iEQ45 tripod.
Parts include
2
:
1. 1x MiniPier Body
2. 1x iEQ45 center stud and alignment peg
3. 2x M8 hex head screws for iEQ tripod mounting
4. 1x M12 Center Bolt with turning lever for MiniTower/MiniTower Pro mounting
5. 3x M10 hex head screws for MiniTower tripod mounting
6. 1X iEQ30 alignment peg and 2X mounting screws (optional, for those who does not have a
iEQ30 tripod)
Specifications:
Pier diameter: 5.7" (144mm) with 6" (150mm) Flange plates
Pier height: 8" (203mm)
1
For an iEQ30 mount, an iEQ45 or MT/MTP tripod is needed. A top flange with iEQ30 mounting holes will be
supplied. Please specify when ordering.
2 Parts included may be different from the list and photos.