IBM 07N2230 - Manual (Page 8)

P/N: 55P5776
8
digital signal cable. If two digital signal cables are attached, disconnect both.
Disconnect the digital signal cable from the computer. The disconnected digital signal cable is
unnecessary with a converter box. Store the cable away.
2.2. Connecting the Converter Box Display Signal Cables
Fig. 6 Dual Link
Connect the end marked "A" of the converter signal cable (07N2229) to digital signal connector A at
the rear of the monitor.
Important:
Connecting or disconnecting cables while the monitor or computer is switched on may
damage the computer or graphics card.
Converter signal cable
Converter box
Dual Link signal cable