Integra RDV-1.1 - Manual (Page 37)

37
Connecting —Continued
L. Analog Audio Connection
(Dolby Digital, DTS, DVD-Audio & SACD)
To fully enjoy the multichannel audio of DVD-Audio
and SACD, you need to connect the RDV-1.1’s 5.1/7.1-
channel analog audio output to a multichannel analog
audio input on an AV receiver. Dolby Digital and DTS
soundtracks can also be fully enjoyed with this type of
connection.
Use a multichannel analog audio cable (RCA) to connect
the RDV-1.1’s FRONT, SURR 1, CENTER, and SUB-
WOOFER AUDIO OUTs to a 5.1-channel analog audio
input on the AV receiver. (You can use several separate
RCA audio cables instead of a multichannel cable.) Set
the SURR MODE (AUDIO OUT) switch to 1.
If your AV receiver supports 7.1-channels and you’re
using back surround speakers, connect the RDV-1.1’s
SURR 2 AUDIO OUTs to the AV receiver’s surround
back left and right inputs as well, and set the RDV-1.1’s
SURR MODE (AUDIO OUT) switch to 1+2.
Notes:
• Refer to the hookup information supplied with your
AV receiver.
• You can experience Dolby Digital only with DVDs
that bear the Dolby Digital logo. Likewise, you can
experience DTS only with DVDs or CDs that bear the
DTS logo.
• DVD-Video discs may contain Dolby Digital and DTS
soundtracks. The Dolby Digital soundtrack will be
selected by default. To play the DTS soundtrack, use
the movie’s main menu and look under Language or
Audio Setup. Alternatively, use the remote controller’s
[Audio] button (see page 63).
• See the table on page 28 for details on how the
RDV-1.1’s audio outputs handle Dolby Digital, DTS,
DVD-Audio, and SACD.
This section explains how to connect the RDV-1.1 to a
stereo hi-fi amp or receiver for sound quality better than
that provided by most TVs. This is great for listening to
your CDs and MP3s. DVD-Video discs and VCDs will
sound better too. You can also enjoy Dolby Surround, if
your receiver supports Dolby Pro Logic.
M. Analog Connection
Use an RCA audio cable to connect the RDV-1.1’s
D.MIX AUDIO OUT to a stereo analog audio input on
your amp or receiver.
Notes:
• See the table on page 28 for details on how the
RDV-1.1 outputs audio from the D.MIX AUDIO
OUT.
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
R L
FRONT
SUB
SURR
CENTER
FRONT D. MIX SURR 1 CENTER SURR 2
L
R
L
R
SUB
WOOFER
AUDIO OUT
Signal flow
AV receiver
Connecting a Stereo Amp
COAXIAL OPTICAL OPTICAL COAXIAL
DIGITAL 1 DIGITAL 2
DIGITAL 2 ( BALANCED)
AES/EBU
AUDIO OUT D. MIX FRONT SURR 1 CENTER SURR 2
L
R
L
R
IN
SUB
WOOFER
1
2
Y P B P R
OUT
OUT
IN
REMOTE CONTROL
VIDEO OUT
COMPONENT
VIDEO S VIDEO VIDEO
S VIDEO
Y
P B
P R
Y
P B
P R
IN
1+ 2 1
RS 232 HDMI VIDEO IN IR
S400 ( AUDIO)
AUDIO OUT
HD VIDEO OUT
COMPONENT
12 V TRIGGER
SURR MODE (AUDIO OUT)
R L
D. MIX
L
R
AUDIO OUT
AUDIO IN
Signal flow
Stereo amp