iHome IDM12 - Manual (Page 7)

iDM12
Using the
Charging the Unit
1.Connect the micro USB plug to
the micro USB charging port on
the back of the unit.
2.Connect the standard USB plug
end of the cable to a power USB
port on a computer or other USB
charging device. For first time
use, charge unit for about 8
hours.
3. A green light flashes while the
unit is charging and glows
steadily when unit is fully
charged. If unit is not
powered on when micro USB
plug is connected, the green light
flashes once to indicate unit is
charging.
3
P7
NOTE: When unit is on and not
connected to power source,
flashing green light indicates
battery needs charging.
USB 2.0