iHome iP40 - Manual (Page 4)

1
NOTE: If you do not have an insert for your iPhone/iPod, please visit
www.ihomeaudio.com or call iHome toll free at 800-288-2792 to purchase one
iP40 Quick Start
2:inserts
Select the dock insert for your
iPhone/iPod model from the table
below and place insert in dock.
Never dock an iPhone or iPod
without an insert in place.
3:iPod/iPhone
Insert iPhone or iPod into dock with
proper insert (iPhone/iPod must not
be in a skin or case). iPhone/iPod
will charge while docked. Press Play
Button on iP40 to play iPhone/iPod.
1:power
Attach AC adaptor cable to jack on
back of the iP40 and plug the other
end into a wall socket.
nano 5G
insert 18
nano 5G
iPhone 3G
Insert 15
iPhone 3G/3GS iPod touch 2G
iPod touch 2G
insert 16
For this iPod
Use this insert
4:time
• To use time sync, dock your iPhone/iPod and press the Time
Sync/Set Button. The unit will sync to the time on your iPhone/iPod.
• To set time manually, move the
DST switch on rear of unit to +1 or -1
(adds or subtracts an hour for daylight saving time or standard time).
• Press & hold the
Time Sync/ Set button on the back of unit until the
hour display flashes. Press / buttons to set the current hour.
• Press the
Time Sync/ Set button. The minute display flashes.
Press / buttons to set the current minutes.
• Press the
Time Sync/ Set button again to confirm time setting.
RESETRESET
TESTTEST