IOGear GBHFK231 - Manual (Page 28)

28 29
Restore to Default Settings
When the Car Kit is on and in standby mode, press and hold both “+” and “-“ 1.
buttons for 10 seconds until the BLUE and RED LED flash 5 times. Then the
Car Kit will enter pairing mode automatically after the reset.
When the Car Kit is not powered on, turn on the Car Kit and press and hold
2.
both “+” and “-“ buttons for 10 seconds until the BLUE and RED LED flash
5 times. Then the Car Kit will resume standby mode automatically after the
reset.