InFocus IN5100 - Manual (Page 7)

7
Network Setting
Displays and configures network settings.
NOTE:
• The new configuration settings are activated after restarting the network connection. When the configuration set-
tings are changed, you must restart the network connection. You can restart the network connection by clicking
[Network Restart]
on the main menu.
• If you connect the projector to an existing network, consult a network administrator before setting server
addresses.
Item Description
IP Configuration
DHCP On/ Off
IP Address
Subnet Mask
Default Gateway Configures network settings.
Enables/disables DHCP.
Configures the IP address when DHCP is disabled.
Configures the Subnet Mask when DHCP is disabled.
Configures the Default Gateway when DHCP is disabled.
Projector Name Configures the projector name.
SysLocation Configures the location to be referred to when using SNMP.
SysContact Configures the contact information to be referred to when using SNMP.