Inova PD00941013.001 - Manual (Page 74)

©2004 Inova Computers GmbH Page C-4 ICP-P4/PM/CM Appendix-C
ITM-RIO Appendix C
C1.3 ITM-RIO-D-x Transition Module
Figure C1.3 illustrates the construction of the ITM-RIO-D-x module. The connections are straight
forward and need little by way of explanation. None of the connectors can be incorrectly inserted
thanks to the mechanical keying of both plug and socket. Table C1.3 explains the significance of
the interfaces labelled in Figure C1.3.
Note:
Care should be exercised when insert-
ing the cables linking the COM, LPT,
EIDE and floppy etc. Only those cables
supplied by Inova Computers should
be used.
Figure C1.3 Inova Rear I/O Transition Module ITM-RIO-D-x