Image IMTL11992 User Manual

Page 18

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However, when the next ÒchirpÓ is
heard, the speed and/or incline will change to
the next settings of the CD or video program.

To stop the walking belt at any time, press the
Stop button on the console. The Time/Segment
Time display will begin to flash. To restart the pro-
gram, press the Start button. After a moment, the
walking belt will begin to move at 1.0 mph. When
the next ÒchirpÓ is heard, the speed and in-
cline will change to the next settings of the CD
or video program. The program can also be
stopped by pressing the Stop button on your CD
player or VCR.

When the CD or video program is completed, the
walking belt will stop and the Time/Segment Time
display will begin to flash. Note: To use another
CD or video program, press the Stop button or re-
move the key and go to step 1 on page 17.

Note: If the speed or incline of the treadmill
does not change when a ÒchirpÓ is heard:

¥ make sure that the iFIT.com indicator is lit and

that the Time/Segment Time display is not
flashing. If the Time/Segment Time display is
flashing, press the Start button on the con-
sole

¥ adjust the volume of your CD player or VCR. If

the volume is too high or too low, the console
may not detect the program signals

¥ make sure that the audio cable is properly

connected, that it is fully plugged in, and that
it is not wrapped around a power cord

¥ if you are using your portable CD player and

the CD skips, set the CD player on the floor or
another flat surface instead of on the console.

Follow your progress with the five displays.

See step 7 on page 11.

When the program is completed, remove the
key.

Step onto the foot rails and remove the key from
the console. Keep the key in a safe place. Note: If
the displays and various indicators on the con-
sole remain lit after the key is removed, the
console is in the ÒdemoÓ mode. Refer to page
20 and turn off the demo mode.

CAUTION: Always remove iFIT.com CDÕs and
videocassettes from your CD player or VCR
when you are finished using them.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off
position.