IronPort Systems 4108GL - Manual (Page 61)

4-5
Using the HP Web Browser Interface
Starting an HP Web Browser Interface Session with the Switch
Usin
g
th
e HP
Web
Bro
w
ser
In
te
rfa
c
e
Starting an HP Web Browser Interface
Session with the Switch
You can start a web browser session in the following ways:
■ Using a standalone web browser on a network connection from a PC or
UNIX workstation:
• Directly connected to your network
• Connected through remote access to your network
■ Using a management station running HP TopTools for Hubs & Switches
on your network
Using a Standalone Web Browser in a PC or UNIX
Workstation
This procedure assumes that you have a supported web browser (page 4-4)
installed on your PC or workstation, and that an IP address has been config-
ured on the switch. (For more on assigning an IP address, refer to "IP
Configuration" on page 7-3.)
1. Make sure the Java TM applets are enabled for your browser. If they are
not, use the options menu in your browser to do the following:
• In Netscape, enable the Java and JavaScript options.
• In Microsoft Internet Explorer, enable the Java Permissions.
Refer to your selected browser’s online Help for specific information on
enabling the Java applets.