Icom IM422 - Manual (Page 12)

6
3
BASIC OPERATION
п п U.S.A., international and Canadian channels
The IC-M422 is pre-programmed with 57 U.S.A., 57 interna-
tional and 61 Canadian channels. These channel groups may
be specified for the operating area.
q Push [CH/WX• DUAL ] to select a regular channel.
• If a weather channel appears, push [CH/WX• DUAL ] again.
w Push both [Y] and [Z] on the transceiver to change the
channel group, if necessary.
• U.S.A., International and Canadian channel groups can be se-
lected in sequence.
e Push [Y] or [Z] to select a channel.
• “DUP” appears for duplex channels.
• “
” appears when a simplex channel is selected.
п п Weather channels
The IC-M422 has 10 weather channels. These are used for
monitoring broadcasts from NOAA (National Oceanic and At-
mospheric Administration.)
The transceiver can detect a weather alert tone on the se-
lected weather channel while receiving the channel, during
standby on a regular channel or while scanning. (p. 33)
q Push [CH/WX• DUAL ] once or twice to select a weather
channel.
• “WX” appears when a weather channel is selected.
• “WX ALT” appears when the Weather Alert function is in use.
(p. 33)
w Push [Y] or [Z] to select a channel.
Scrolls
Appears
Scrolls
Appears
When Weather alert is OFF.
When Weather alert is ON.
Push once or twice
Push and