Assembly – Image IMTL11901 User Manual
Page 5
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own wire cutters (not included).
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
2. Cut any plastic ties from the Right and Left Handrails (93,
7). Set the Right Handrail (the longer Handrail) on the
right Upright (80). Have another person lift the Handrail at
the indicated location. While pressing down on the
Handrail at the indicated location, firmly tighten a Short
Handrail Bolt (59) with a Washer (60) into the Upright and
the Right Handrail.
Attach the Left Handrail (7) as described above.
1. With the help of a second person, carefully raise the
Uprights (80) until the treadmill is in the position shown.
80
1
93
80
7
59
59
60
60
2
3. Insert a Long Handrail Bolt (37) with a Washer (60) and a
Plastic Washer (53) into the lower end of the Right
Handrail (93) as shown. Finger tighten the Long Handrail
Bolt into the Frame (87).
Next, hold an Upright Spacer (11) inside the lower end of
the right Upright (80). Insert a Long Handrail Bolt (37) with
a Washer (60) through the Upright and the Upright Spacer,
and finger tighten the Upright Bolt into the Frame (87).
Repeat this step on the left side of the treadmill (not shown).
Tighten the three Long Handrail Bolts (37) on each side of
the treadmill.
60
53
87
11
93
37
37
60
37
80
4. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see pages 12 and 13). To protect the floor
or carpet from damage, place a mat under the treadmill.
5
3
Lift Here
Press
Down
Here