Integra DTR-80.2/70.2 - Manual (Page 8)

8
12
Message “Complete!” appears on the
front display of the AV
receiver/controller, indicating that the
update has been completed.
13
Using ON/STANDBY on the front panel,
turn off the AV receiver/controller and
then remove the USB storage device.
* Do not use ON or STANDBY on the remote
controller.
14
Press ON/STANDBY to turn on the AV
receiver/controller.
Congratulations!! Now you have the latest
firmware on the AV receiver/controller.
(Go to the next page for troubleshooting.)