beautypg.com

I-Data 5250 ALLY User Manual

Page 44

background image

AGILE 5250 ALLY User’s Guide and Reference

Page 1-22

2. ASCII to EBCDIC
3. EBCDIC to EBCDIC
4. EBCDIC to HP LaserJet (Roman 8 extended ASCII)
5. EBCDIC to PC (standard PC extended ASCII character set)
6. EBCDIC to PostScript (IsoLatin1 extended ASCII character set)
7. Xerox 275 protocol converter EBCDIC to ASCII
8. User Table 1
9. User Table 2
A.User Table 3
B.User Table 4
C.User Table 5
D.User Table 6
E.User Table 7
F.Xerox EBCDIC Font Download to ASCII (default for fonts)

To change the translation table selection, press the MODE button on the

5250 ALLY front panel until the LED reads “8.” After two seconds, the

LED will display an underscore (_). Then press the MODE button until the

LED displays the number of the data type to be translated (0, 3, 6, 7).
After the data type has been selected, the LED will display an equals sign

(=). The user must then press the MODE button until the number of the

appropriate translation table for the data type is displayed (0-F.)
After two seconds, the translation table selection for the selected data type

will change, and the unit will return to Normal Operating Mode. This

process must be repeated for each data type that the user would like routed

through a different translation table.
Note: The translation table selection is loaded as part of the output port

configuration. Loading an output port configuration will overwrite this

selection. As such, changes to this selection must be made after loading the

output port configuration.