Insignia NS-LCD32 - Manual (Page 5)

3
Insignia NS-LCD32 LCD TV
www.insignia-products.com
20 Damage requiring service—If any of the
following conditions occurs, unplug the power
cord from the AC outlet, and request a
qualified service person to perform repairs.
• When the power cord or plug is damaged.
• When a liquid is spilled on the television
or when objects have fallen into the
television.
• When the television has been exposed to
rain or water.
• When the television does not operate
properly as described in the operating
instructions.
Do not touch the controls other than those
described in the operating instructions.
Improper adjustment of controls not
described in the instructions can cause
damage, which often requires extensive
adjustment work by a qualified technician.
• If the television has been dropped or the
cabinet has been damaged in any way.
• When the television displays an abnormal
condition or exhibits a distinct change in
performance. Any noticeable abnormality
in the television indicates that the
television needs servicing.
21 Safety checks—Upon completion of service
or repair work, request the service technician
to perform safety checks to ensure that the
television is in proper operating condition.
22 Wall or ceiling mounting—When mounting
the television on a wall or ceiling, be sure to
install the television according to the method
recommended by the manufacturer. This is a
safety feature.
23 Power source—This television is intended to
be supplied by a listed power supply
indicated on the marking label. If you are not
sure of the type of power supply to your
home, consult your television dealer or local
power company. For added protection for this
television during a lightning storm, or when it
is left unattended and unused for long
periods of time, unplug it from the wall outlet
and disconnect the cable system. This will
prevent damage to the television due to
lightning and power line surges. When the
television has to be used with another power
supply voltage, the power cable must be
changed. Consult your television dealer. The
socket outlet should be installed near the
equipment and easily accessible. Use only
the power cord designated by our dealer to
ensure safety and EMC. When connecting
other televisions such as VCRs and personal
computers, you should turn off the power of
the television for protection against electric
shock.
24 Panel protection—The display panel used in
this television is made of glass. Therefore, it
can break when the television is dropped or
impacted upon by other objects. Be careful
not to be injured by broken glass pieces in
case the LCD panel breaks.
25 Pixel defect—The display panel is a very high
technology television, giving you finely
detailed pictures. Occasionally, a few
non-active pixels may appear on the screen
as a fixed point of blue, green, or red. Please
note that this does not affect the performance
of your television.
Note to cable television system installer
This reminder is provided to call the cable
television system installer’s attention to Section
820 40 of the NEC which provides guidelines for
proper grounding and, in particular, specifies
that the cable ground shall be connected to the
grounding system of the building, as close to the
point of cable entry as practical.
Features
Front control panel
Item Description
1 Power indicator
2 Remote sensor