Starting and programmes, Programme table, Briefly: starting a programme – Indesit WI 121 User Manual
Page 8
8
GB
Starting and Programmes
Programme table
Notes
For the description of the Anti-crease function, please see page 9. The information contained in the table is purely
indicative.
Special programmes
Daily wash (programme 9 for Synthetics) is designed to wash lightly soiled garments in a short amount of time: it only lasts 30
minutes and allows you to save on both time and energy. By setting this programme (9 at 30°C), you can wash different fabrics
together (except for woollen and silk items), with a maximum load of 3 kg. We recommend the use of liquid detergent.
A class at 40°, the washing machine has a special programme to allow you to obtain optimum results even at low
temperatures. By setting programme 4 at a temperature of 40° C, the results you will obtain will be the same as you
would normally obtain at 60°C thanks to the washing machines action and the length of the wash cycle.
Briefly: starting a programme
1. Set the desired programme.
2. Set the wash temperature (see page 9).
3. Load your laundry into the appliance and shut the door.
4. Add the detergent and any fabric softener (see page 10).
5. Turn the appliance on by pressing button . The
ON/OFF led begins to flash, after 5 seconds, the
setting is accepted, the led stops flashing (staying
on) and the wash cycle begins.
6. To cancel the cycle set, select one of the symbols
(Stop/Reset) and wait 5 seconds: when the
cancellation has been accepted, the ON/OFF led
flashes, and you can turn the appliance off and
set a new cycle.
Note: if you wish to set a programmed start, see page 5.
7. When the programme is completed, the DOOR
LOCK led will turn off to indicate that the
appliance door can be opened.
Turn the washing machine off by pressing button .
Take out your laundry and leave the appliance
door ajar to allow the drum to dry thoroughly.
Type of fabric and
degree of soil
Progr. Tempe-
rature
D etergent
Fabric
softener
C ycle
length
(minutes)
Max.
Spin
Speeds
(r.p.m.)
D escription of wash cycle
pre-
wash wash
Cotton
Extremely soiled whites
(sheets, tablecloths, etc.)
1
90°C
135
Max.
Pre-wash, wash cycle, rinse cycles,
intermediate and final spin cycles
Extremely soiled whites
(sheets, tablecloths, etc.)
2
90°C
125
Max.
Wash cycle, rinse cycles, intermediate and
final spin cycles
Heavily soiled whites and fast
colours
3
60°C
110
Max.
Wash cycle, rinse cycles, intermediate and
final spin cycles
Heavily soiled whites and fast
colours
4
40°C
140
Max.
Wash cycle, rinse cycles, intermediate and
final spin cycles
Slightly soiled whites and delicate
colours (shirts, jumpers, etc.)
5
40°C
70
Max.
Wash cycle, rinse cycles, intermediate and
final spin cycles
Rinse cycles
Max.
Rinse cycles, intermediate and final spin
cycles
Spin cycle
Max.
Draining and final spin cycle
Stop/Reset
-
Interrupts/Cancels the selected programme
Synthetics
Heavily soiled fast colour synthetics
(baby linen, etc.)
6
60°C
75
800
Wash cycle, rinse cycles, anti-crease or
delicate spin cycle
Heavily soiled fast colour synthetics
(baby linen, etc.)
7
50°C
70
800
Wash cycle, rinse cycles, anti-crease or
delicate spin cycle
Delicate colour synthetics
(all types of slightly soiled garments)
8
40°C
60
800
Wash cycle, rinse cycles, anti-crease or
delicate spin cycle
Delicate colour synthetics
(all types of slightly soiled garments)
9
30°C
30
800
Wash cycle, rinse cycles and delicate spin
cycle
Rinse cycles
800
Rinse cycles, anti-crease or delicate spin cycle
Fabric
S
oftener
800
Rinse cycles with automatic introduction of
softener, anti-crease or delicate spin cycle
Spin cycle
800
Draining and delicate spin cycle
Stop/Reset
-
Interrupts/Cancels the selected programme
Delicates
W ool (
Hand wash
)
10
40°C
50
600
Wash cycle, rinse cycles, anti-crease and
delicate spin cycle
Particularly delicate garments and
fabrics (curtains, silk, viscose, etc.)
11
30°C
45
no
Wash cycle, rinse cycles, anti-crease or
draining
Rinse cycles
600
Rinse cycles, anti-crease or draining
Spin cycle
600
Draining and delicate spin cycle
Drain
no
Drain
Stop/Reset
-
Interrupts/Cancels the selected programme