Memorex MMG-CR3810 - Manual (Page 15)

14
OPERATION (CONTINUED)
Insert a CD as described on the
previous page. Press the POWER
button ❶ to turn the unit on and press
the CD button ❷. The total playing
time and number of tracks will appear
in the display.
2
1
1
Press the PLAY/PAUSE ( ) button
to start playback; the Play indicator
will appear. TO PAUSE PLAYBACK,
press the PLAY/PAUSE (
) button
again; the display will blink and the
Pause indicator will appear. Press
again to resume playback.
2
TO PLAY A CD
To skip forward or backward through
the tracks on the disc, press the CD
SKIP/TUNING or button.
To
search forward or backward through
the tracks on the disc, press and hold
the SKIP/TUNING
or button.
3
Adjust the volume using the VOLUME
+/– buttons ❶ as desired. When the
disc is through playing, it will stop.
Press the STOP (■) button ❷ to stop
the disc before it is finished.
1 1
2
4
NOTES:
• If a disc is inserted incorrectly, dirty, damaged or not present at all, the
display will show “no dISC”
• To remove the CD, press the OPEN/CLOSE button and remove the CD.
• Most buttons are both on the main unit and the remote control.
FAQS: Do I need an adapter to play 3” singles?
No, simply insert the 3” single into the groove.
What is the maximum time for a CD in this unit?
The maximum time is 74 minutes.
MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 14