Maytag Performa 8113P424-60 - Manual (Page 8)

7
Oven Cooking
Clock and Timer Control (select models)
Note: The display will flash when electrical power is first supplied to the appliance or if there has been a power failure.
To Set the Clock:
1. Press the Clock pad.
• A beep will sound when the Clock pad is pressed.
2. Press or press and hold the More+ or Less- pad until the
correct time of day appears in the display.
• Press to change the time in one minute increments.
• Press and hold to change the time in 10 minute
increments.
To recall the time of day when the timer is displayed, press
the Clock pad.
To Set the Timer:
The timer can be set from one minute (0:01) up to 12 hours
(12:00). The timer does NOT control the oven.
1. Press the Timer pad.
• A beep will sound when the Timer pad is pressed.
• 0:00 will appear in the display.
2. Press or press and hold the More+ or Less- pad until the
correct time appears in the display.
• Press to change the time in one minute increments.
• Press and hold to change the time in 10 minute
increments.
• Timer will start automatically after a few seconds. The
flashing colon indicates that the timer is in use.
• If the Clock pad is pressed, the colon will continue to
flash to indicate the timer is in use.
3. A beep will sound at one minute (0:01).
4. At the end of the timer operation, 0:00 will appear in the
display and three beeps will sound.
• One beep will sound every 10 seconds for 10 minutes or
until the timer operation is cancelled.
To Cancel the Timer:
Press the Timer pad and the current time of day will reappear
in the display.
Note: When 0:00 is displayed, pressing either the Timer or
Clock pad will also cancel the timer operation.