Manley Neo-Classic 300B RC Preamplifier 2008 - present - Manual (Page 14)

SPECIFICATIONS
* Inputs: 5 stereo pair unbalanced RCA jacks
* Outputs: 2 stereo pairs MAIN out same as SUB out unbalanced RCA jacks
* RECORD output: 1 stereo pair pre-volume control unbalanced RCA jacks
* HEADPHONE Outs: 2 front panel 1/4” headphone jacks
* Optimized headphone impedance switching: 30-400 ohms to 300-4000 ohms
* MUTE: Selecting HEADPHONE operation mutes LlNE outputs
* Output Vacuum Tubes: 2 x 300B Electro-Harmonix
* Input Tubes: 2 x 6SL7GT Electro-Harmonix
* Rectifier Tubes: 2 x 5U4GBEH Electro-Harmonix
* Regulator Tubes: 2 x OD3 NOS JAN USA
* Gain: factory set at 12 dB at max Volume
* Internal Variable Feedback: 8.5 dB of global NFB is used @ 12 dB of gain, adjustable trim -1.7dB to +1dB
* Noise Floor: typically -70 dB (1 Hz - 100 KHz)
* S/N Ratio: typically 105 dB (A WGT, 20 Hz - 20 KHz)
* Frequency Response: 5 Hz to 50 KHz ±1dB
* Channel-to-Channel Separation (L to R): @1KHz 48 dB; @10KHz 35 dB; @20KHz 34 dB
* Channel-to-Channel Separation (R to L): @1KHz 50 dB; @10KHz 40 dB; @20KHz 37 dB
* THD: 0.08 % @ 1KHz at 1V rms out
* Distortion THD+N: -80 dB (.01 %) zero “crossover” distortion, mostly 2nd harmonic
* Input Sensitivity: 250mV (-9.8dBu) yields 1V out
* Input Impedance: 100 Kohm motorized ALPS volume control
* Maximum Input Level: 5.5dBu or 1.459 Vrms @ 1KHz, volume control at maximum
* Output Impedance (LINE STAGE): 100 ohms
* Maximum Output Level: 17.2dBu or 5.636 Vrms @ 1KHz, volume control at maximum
* Output Power (100 ohm Headphones): 1W (10 V RMS) (28 V P-P)
* Output Power (600 ohm Headphones): 1W( 25 V RMS) (70 V P-P)
* Power Consumption: 170 Watts (1.4 A @ 120VAC)
* Operating Mains Voltage: Factory set for 100V, 120V or 220-240VAC operation for original destination
country’s mains voltage.
* Operating Mains Voltage: changeable with power transformer re-wiring and fuse value change.
* Mains Voltage Frequency: 50~ 60Hz
* Dimensions: W=19”. L=13”. H=3 1/2”
* Shipping Weight: 28 Ibs.
14