MACKIE 8-Channel - Manual (Page 8)

8
PPM608
PPM608
Microphones
Wireless
Microphone
Rear Panel
Front Panel
Power Amp Mode
switch set to
Stereo Mains
LINE MIC
R R
PGM 2 MAIN OUT MIC
L L L L L R PHONO CD SEND R
BOOTH FX
GND LINE PHONO
RETURN
L(MONO) R R
L
R
LIVE RECORD
~100-240 VAC 50-60Hz 20W
PGM 1
LINE PHONO GND
PHONO CD
R R
L L
Wireless Mic
Receiver
Graphic EQ
Turntables with phono-level output
Mackie d.2 Pro
DJ Production Console
iPod TM Docking Station
Powered Subwoofer
(left main mix)
Powered Subwoofer
(right main mix)
HD1521
Powered
Speaker
HD1521
Powered
Speaker
Passive Speakers
(plays stereo main mix)
DJ System
This diagram shows a wireless microphone receiver connected to the channel 1 line input, a graphic
EQ connected to channel 1's insert jack (to help control feedback in the wireless mic), a microphone con-
nected to channel 2, and an iPod docking station attached to channel 8's RCA inputs.
A Mackie d.2 Pro is connected to two turntables, and its RCA output connects to the powered mixer's
channel 7 stereo RCA inputs. Use the d.2 Pro's advanced DJ controls to get the best performance from
your records. Use the powered mixer to play the d.2 Pro output, and control the mics and iPod.
The power amp mode switch is set to play the stereo main mix in the passive speakers, connected to the
speaker-level power outputs.
Mackie HD1521 powered speakers and powered subwoofers are connected to the line-level main mix
outputs, and also play the stereo main mix to your audience.