Re-fitting the shipping rods 46, Installation and connection – Miele W 1612 User Manual
Page 46
,
To avoid the risk of injury, the
holes for the shipping rods need to
be covered once the rods have
been removed.
^ Fit the covers, then caps into the two
holes.
^ Secure the shipping rods to the back
of the washing machine. Make sure
that the holes
b are fitted over the
retainers
a.
,
The washer must NOT be moved
without the shipping rods in place.
Store them as shown or keep in a
safe place for future use. They will
need to be attached every time you
transport the washer (for example,
during a move).
Re-fitting the shipping rods
Reverse the instructions to attach the
shipping rods when needed.
Installation and connection
46