Monessen Hearth GCUF Series - Manual (Page 13)

71D0530
13
CANOPY INSTALLATION
INSTALLING CANOPY
A canopy is furnished with each firebox and MUST be installed for safe operation. See Figure 14.
1. Align the canopy with the holes in the top frame.
2. Secure the screws as shown.
3. Tighten side screws. Make sure the canopy is level and
secure.
The firebox canopy must not be
modifi ed or replaced with a canopy
that may be provided with the unvented
decorative room heater.
W
ARNING
Close fi replace screen panel before
operating a decorative type unvented
room heater.
W
ARNING
Figure 15 - Installing Canopy