MartinLogan Speaker - Manual (Page 14)

1 Placement
When placing the Abyss inside of a cabinet it is recom-
mended that there be a minimum of three inches of open
space between the cabinet and the front and back sides
(see figure 15) .
When installing the Abyss in a cabinet it is recommended
that the subwoofer be converted to a front firing configuration .
Please note, when the Abyss is in a front firing configuration 90°
RCA adaptors may be required to make signal connections.
Two 90° RCA adaptors are included with the Abyss subwoofer.
Converting .Abyss .to .Front .Firing .Configuration:
1 Prepare a flat surface with a blanket to protect the Abyss'
finish . Unplug signal and power connections . Turn the
Abyss upside down . Gently lift and remove the Abyss
base (see figure 16) .
2 Rotate the cabinet 90°, positioning the backplate on top
(see figure 17) .
3 Place the Abyss base over the backplate and gently push
it into place . Install the grill cover onto the front of
the Abyss (see figure 18) . Please note, when the Abyss
is used in a down firing configuration 90° RCA adaptors
may be required to make signal connections. Two 90°
RCA adaptors are included with the Abyss subwoofer.
Installing Abyss in a Cabinet
Figure .15 . Placing the Abyss in a cabinet requires a minimum of three
inches of open space on the front and back .
Figure .16 . Step 1—Converting the Abyss to a front firing configuration .
Figure .17 . Step 2—Converting the Abyss to a front firing configuration .
Figure .18 . Step 3—Converting the Abyss to a front firing configuration .