Metra Electronics 95-8223 - Manual (Page 4)

95-8223 KIT ASSEMBLY
2
A
B
DOUBLE DIN/STACKED ISO MOUNT UNITS PROVISION
Attach the factory mounting brackets
and the Double DIN trim plates to the
Double DIN or the stacked ISO mount
unit(s) using the screws supplied with
the unit(s). (Figure B) 2
Attach the clips removed from the
factory radio to the back of the radio
housing trim plate. (Figure A) 1
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.