Getting started, Insert sim card/battery, Remove sim card – Siemens SL55 User Manual
Page 12

Getting started
11
SL55 Fugu, lang en, A31008-H4910-A1-1-7619 (9. January 2003, 15:00)
©
Siem
ens AG 2001
, D
:\P
oo
l\L
55\Sl55\en
Freigabe
S3\Langversi
on\SL
55_Sta
rtup
.f
m
Getting
started
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Press the lock
n
, then remove the
battery upwards in the direction
of the arrow
o
.
• Insert the SIM card in the opening
with the contact area facing down-
wards
and push gently until it en-
gages below the holder (make
sure the angled corner is in the
correct position
p
).
• Insert the battery in the lower
edge
q
, then press downwards
r
until it engages.
Remove SIM card
Remove the battery. First push the
SIM card
s
gently through the slot
for the holder and at the same time
lift it up slightly
t
on the other side.
Then remove the SIM card
completely.
n
o
p
Additional information
Always switch off phone before removing
the battery!
Only 3V SIM cards are supported. Please
contact your service provider, if you have
an older card.
Functions with SIM card ..................p. 118
q
r
s
t