MIDLAND LXT210/216/303/305/310/350/410/435 - Manual (Page 9)

®
Page 9 www.midlandradio.com
LXT210/216/303/305 SERIES QUICK REFERENCE CHART
LXT310/350/410/435 SERIES QUICK REFERENCE CHART
MONITOR (LXT310/350/410/435 Series only)
Pressing and holding the MONITOR button for 1 second will let you
hear noise so you can adjust the volume level of the radio when not
receiving a signal. This should be used to check activity on your
current channel before transmitting.
Press and hold the MONITOR button for 1 second again to get out
of MONITOR mode.
SCAN
Your LXT210/216/303/305/310/350/410/435 Series can scan all 22
channels for activity. To enter, quickly press the SCAN button. Repeat
the same procedure to exit. Your radio will rapidly scan each of the 22
channels and stop on any active channel for 5 seconds before
resuming scan.
When you press the PTT button to transmit on an active channel, the
scanning function will stop and remain on the active channel. To
resume scanning, quickly press the SCAN button.
Model LXT210/216/303/305/310/350/410/435 Series
MENU Channel eVOX
1~22 oF/1/2
Privacy
oF~38
Roger Beep
On/Off
Power
H/L
Call Tone
**1~5
Vibrate
On/Off
WX Channel
1~10
Press Menu
button when
WX Band is ON
Silent Operation
On/Off
LXT410/435
Series only **LXT410/435 Series only
**LXT310/350 Series : 1~3
WX Band
On/Off
MENU Channel
1~22
Roger Beep
On/Off
Power
H/L