Melissa 746085 - Manual (Page 8)

´ To get the best out of your new blender, please
read these instructions carefully before using it for
the first time. We also recommend that you save
them in case you need them at a later point to
remind yourself of the blender’s functions.
IMPORTANT SAFETY MEASURES
- Read the user instructions all the way
through.
- Use the appliance for its intended purpose
only.
- Never pull on the cord; to unplug from the
socket, grasp the plug firmly and pull
carefully.
- Keep the cord away from hot surfaces.
- Should the cord become damaged, it must
be replaced at a workshop specified by the
manufacturer, as special tools are required.
- Should the appliance itself become
damaged, it must be taken to a specialist for
repair. If the appliance is subjected to
unauthorised repairs the guarantee will
become void.
- Keep an eye on any children in the vicinity of
the appliance when it is being used. The
appliance should be kept out of the reach of
children.
- For indoor use only.
- The blender is not for commercial use.
OVERVIEW OF FUNCTIONS:
1. Removable cap in lid
2. Lid with filling hole
3. Blender goblet
4. Motor section
5. Switch
BEFORE USE:
Before using for the first time, take the blender
apart and wash the blender goblet, lid and blade
section in mild detergent and dry them
thoroughly. Do NOT immerse the motor section in
any form of liquid!
How to assemble the blender:
Place the sealing ring in the knife base.
Place the blender glass on the knife base and
fasten it by turning the blender glass clockwise.
USE:
1. Ensure that the knob is at 0.
2. Place the blender glass (including the knife
base) carefully on the motor section, in a way
so the taps on both parts matches (try to
turn the blender glass slightly until it fits).
When the blender glass fits over the motor
section, then fasten the blender glass onto
the motor section by turning it clockwise.
3. Place the required ingredients carefully in the
blender goblet. Do not fill any higher than
1000 ml, otherwise it may overflow.
4. Carefully attach the lid, and plug the blender
in.
5. Start the blender by turning the knob to the
required position.
1: Low speed
2: High speed
0: Stop
P: (Pulse) manual pulse function (high speed)
6. Once the ingredients have reached the
desired consistency, turn the knob to 0. Do
not remove the blender goblet from the
motor section until the blade has stopped
moving completely.
Your blender is equipped with a safety switch,
which automatically cuts off the power to the
motor if the blender goblet is not correctly fitted.
NB!
- Do not leave the blender running for more
than 3 minutes at a time. Stop for a few
minutes and start again.
- Do not remove the blender goblet while the
motor is running.
- Always pour some liquid into the blender
goblet if you are using it to crush ice.
8
UK
1. 2.
3.
4.
5.
B-2C(3)_IM 17/01/05 14:54 Side 8