Miller Electric AC Generator/Air Compressor - Manual (Page 2)

Welding
Mode
CC/DC
CV/DC
CC/AC*
Battery*
Charge
Jump-Start
Weld Output Rated at 104˚ F (40˚ C) NEMA
Amperage and Voltage
600 A, 44 V, 26.4 kW, 40% Duty Cycle
550 A, 42 V, 23.1 kW, 60% Duty Cycle
500 A, 40 V, 20 kW, 100% Duty Cycle
500 A, 40 V, 20 kW, 100% Duty Cycle
400 A, 36 V, 14.4 kW 100% Duty Cycle
750 A, 12 V, Jump-Start
750 A, 24 V, Jump-Start
Weld
Output
Range
20 – 750 A
14 – 40 V
20 – 575 A
12/24 V
Max. Open-
Circuit
Voltage
95
56
64
14/28
Meets NEMA and IEC output ratings. *Only available on deluxe model. **Additional 7 in (178 mm) to top of exhaust. ***Additional 190 lb (86 kg) when fuel tank is full.
CSA approved.
Compressor
Brand
Ingersoll-Rand
CE55 G1
Free Air
Delivery at
1850 RPM
60 cfm
(1.70 m
3 /min)
Free Air
Delivery at
1235 RPM
40 cfm
(1.13 m
3 /min)
Idle
Features
Rotary screw with electric clutch for on/off.
Oil change intervals 500 hrs (same as engine).
Life expectancy 30,000 hrs.
Working
Pressure
Constant
100 psig
7 bar
Duty
Cycle
100%
Oil
Capacity
5 qt (4.7 L)
Automatic
Compressor
Shutdowns
Oil temperature
Engine Brand
Deutz, BF4M
2011 Diesel
Features
EPA certified, turbocharged direct-injected,
liquid-cooled (oil) engine. Right side service
access with 500 hr intervals for oil and filters.
MSHA approved with purchase of certificate
from Deutz dealer.
Type
Four-cylinder,
industrial, liquid-
cooled engine
Engine
Speeds
1850 Run
1235 Idle
HP
63.4
Fuel Capacity
25 gal (95 L)
Automatic Engine
Shutdowns
Oil pressure
Oil temperature
Oil
Capacity
11 qt
(10.4 L)
Engine
7
8
9
18
19
20
21
22
7 23
International Model
1
2
10
11
12
13
4
3
5
6
15
16
17
14
2
Control Panel
Weight
Without Fuel***
Net: 1931 lb
(876 kg)
Ship: 1982 lb
(899 kg)
Deluxe Model
Net: 1956 lb
(887 kg)
Ship: 2007 lb
(910 kg)
Dimensions**
H: 43 in
(1092 mm)
W: 28-1/2 in
(724 mm)
D: 67-1/2 in
(1715 mm)
Generator Output Rated
at 104˚ F (40˚ C)
Peak: 5500 watts
Continuous: 4000 watts,
120/240 VAC, 34/17 A, 60 Hz
while welding
Optional kW
3-phase, 20 kW, 36 A, 240 VAC
1-phase, 12 kW, 50 A,
120/240 VAC while not welding
Specifications
(Subject to change without notice.)
1. AC/DC Voltmeter*
2. AC/DC Ammeter*
3. Amperage Range Switch
4. Amperage/Voltage Adjust Control
5. Amperage/Voltage Adjust Switch
and Remote Amperage/Voltage
Adjust 14-Pin Receptacle
6. Process/Contactor
Selector Switch
7. 120 VAC, 20 A GFCI
Duplex Receptacle
8. 240 VAC, 30 A TwistLock
Receptacle (NEMA L6-30)
9. Air Outlet Valve 3/4 in NPT
10. Engine Oil Pressure Gauge
11. Fuel Gauge — displays engine
hours and oil change intervals
12. Engine Coolant Temperature Gauge
13. Battery Voltmeter
14. Air Compressor Pressure Gauge
15. Air Compressor On/Off Switch
16. Engine Control Switch
17. Starting Aid Switch*
18. 20 kW, 3-Phase Generator*
19. Strain Relief*
20. 50 A, 3-Phase Circuit Breaker*
21. 50 A, 1-Phase 120/240 V
Receptacle (NEMA 14-50)*
22. AC/DC/Battery Charge/
Jump-Start Switch*
23. International Model — 240 VAC,
16 A Pin and Sleeve Receptacle
*On Select Models
Air Compressor