Miele K 9557 iD - Manual (Page 45)

Fitting a furniture door
^ A gap of 8 mm a must be set
between the appliance door and the
fixing bracket.
^ Push the fitting aids b up to the
height of the furniture door: the lower
edge X of the fitting aids must be at
the same height as the upper edge of
the furniture door being fitted (see
-
on the diagram).
^ Undo nuts c and take fixing bracket
d off together with the fitting aids.
^ Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
^ Hang fixing bracket d with the fitting
aids onto the inside of the furniture
door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short chipboard
screws
e (4 x 14 mm). (On cassette
doors only use 4 screws on the
edges).
^ Pull the fitting aids upwards to
remove them f.
^ Turn them around and fit them into
the middle slots on fixing bracket g
for safe keeping.
Building in the appliance
45