Headphones status, Tips & tricks – Motorola MOTOROKR S7-HD User Manual
Page 5
17
headphones status
headphones status
The indicator light on your headphones displays current
status of Bluetooth wireless connection(s) to your phone
and/or music player.
Indicator Light
Wireless Status
steady blue
pairing mode
long blue flash
standby (handsfree
connection only)
long yellow flash
standby (streaming music
connection only)
long green flash
standby (both handsfree and
streaming music connection)
quick blue flash
incoming/outgoing call
long blue pulse
connected on a call
long purple pulse
connected call muted
three green flashes
started/paused music player
long green pulse
music streaming (with
handsfree connection active)
18
headphones status
long yellow pulse
music streaming (without
handsfree connection active)
two yellow flashes
SRS WOW HD on/off
three yellow flashes
stopped music player
slow red flash
idle (not connected to a
device)
Indicator Light
Wireless Status
19
tips & tricks
tips & tricks
multi-point (two device) connection
To connect to a phone and music device at the same
time:
1
Pair and connect to your phone first (see page 6).
2
Turn off your phone and your headphones.
3
Turn your headphones back on.
The Bluetooth indicator flashes to indicate the
headphones are in discoverable mode.
4
Turn on your music device. Make sure the Bluetooth
feature is turned on in the device.
The music device searches for your headphones.
5
Complete steps 5 through 7 on page 6 to pair and
connect your music device and headphones.
6
Turn off your headphones.
7
Turn your phone back on, and make sure the
Bluetooth feature is turned on in both the phone and
music device.
8
Turn your headphones back on. It should now
connect to both devices.
20
tips & tricks
pairing tips
•
To initiate pairing (discoverable) mode
manually when your headphones are already
powered on, press and hold both Call and Play/
Pause buttons at the same time.
•
To clear the paired devices list in your
headphones, press and hold Play/Pause button
while sliding Power switch on. This also turns
SRS WOW HD on and reinitializes volume to
default level.