Miller Electric Coolmate 4 - Manual (Page 8)

Equipment and Options Stock No. Description Qty. Price
Coolmate ™ 1 #300 360 115 VAC, 60 Hz
Coolmate ™ 3 #043 007 115 VAC, 50/60 Hz with CE
#043 008 230 VAC, 50/60 Hz with CE
Coolmate ™ 3.5 #300 245 115 VAC, 50/60 Hz with CE
Coolmate ™ 4 #042 288 115 VAC, 50/60 Hz
#042 288-01-5 115 VAC, 50/60 Hz with CE
Coolmate ™ 3X #300 419 115 VAC, 50/60 Hz
Accessories
Water-Cooled TIG Torch Adapters #195 377 50-mm Dinse with water return line
#195 380 50-mm Dinse flow thru with gas and water return line
#225 028 50-mm thread lock style
#45V11 Water-cooled TIG block
#222 809 18-in. (457 mm) replacement water hose
Water Hose Extensions #40V76R6 6-ft. (1.8 m) hose with two male 5/8-in. 18 LH thread connections
Water Coupler #057 020 Brass hose fitting with 5/8-in. 18 LH thread
Low-Conductivity Coolant #043 810 For TIG and MIG applications. NOT for push-pull systems or where aluminum
(Clear, Pre-Mixed) is in coolant path/circuit.
Aluminum-Protecting Coolant #043 809 For push-pull systems where aluminum is in coolant path/circuit
(Green, Pre-Mixed) and high frequency is NOT used.
Filter Assemblies #166 564 For use with Coolmate 1, 3 and 3X
#215 667 For use with Coolmate 3.5
Filter Strainer #146 249 For use with Coolmate 4
Torch Kits #300 185 250 A with WP20 water-cooled torch
#300 183 310 A with CS310 water-cooled torch
#300 186 400 A with WP18SC water-cooled torch
Date: Total Quoted Price:
Ordering Information
Litho in USA
Distributed by: