Interrupting a program 37, Changing a program 37 – Miele G 5515 User Manual
Page 37

Interrupting a program
A program is interrupted as soon as the
door is opened.
If the door is closed again, the program
will continue from where it was
interrupted.
,
Water in the dishwasher is hot.
Danger of scalding.
Only open the door if absolutely
necessary and exercise extreme
caution when doing so. Before
closing the door again, leave it ajar
for approx. 20 seconds. This will
enable the temperature in the wash
cabinet to settle. Close the door
firmly until it clicks into place.
Changing a program
If the detergent dispenser flap is
already open, do not change the
program.
If a program has already started and
you wish to change it:
^ Press the "Start / Stop" button for at
least one second.
The program is canceled.
^ Select and start the desired program.
Use
37
See also other documents in the category Miele Dishwashers:
- G 1262 (60 pages)
- G 2732 (76 pages)
- G 1202 (60 pages)
- G 2872 (80 pages)
- G 5935 SCi XXL (2 pages)
- G643SCVI (52 pages)
- G848 (60 pages)
- G 5970 (84 pages)
- INSPIRA SERIES G 2140 (52 pages)
- HG01 (36 pages)
- ADVANTA G 2180 (56 pages)
- OPTIMA SERIES G 2430 (60 pages)
- NOVOTRONIC G 841 SC PLUS (48 pages)
- G 4500 (56 pages)
- G 2020 (52 pages)
- G658SCVI (52 pages)
- G 5795 (84 pages)
- G 5575 (72 pages)
- G1470 (60 pages)
- G 2630 SCi (72 pages)
- Platinum G892us (52 pages)
- 05 620 661 (36 pages)
- ESS 3060-10 (16 pages)
- G892 (52 pages)
- G 2150 (52 pages)
- G 5875 (76 pages)
- NOVOTRONIC G 842 SC PLUS (48 pages)
- G 2670 SC (76 pages)
- LaPerla G 2830 SCi (80 pages)
- G 1182 (56 pages)
- G 7856 (56 pages)
- G 2180 (56 pages)
- G 4570 (60 pages)
- TOUCHTRONIC PREMIER PLUS HG01 (56 pages)
- G 2183 (56 pages)
- EXCELLA G 2630 SCI (72 pages)
- G 2472 (60 pages)
- G 5910 (86 pages)
- G 2832 (80 pages)
- NOVOTRONIC G 851 SC PLUS (52 pages)
- NOVOTRONIC G 856 SC ELITE (52 pages)
- INSPIRA G 2140 (52 pages)
- G 5815 (72 pages)
- G2142 (60 pages)