Mercedes-Benz 2003 C 240 4MATIC - Manual (Page 112)

118
Controls in detail
Control system
Instrument cluster submenu
Access the INSTRUMENT CLUSTER submenu
via the SETTINGS menu. Use the INSTRU-
MENT CLUSTER submenu to change the in-
strument cluster display settings. The
following functions are available:
Set time (hours)
̈ Move the selection marker with
the æ or ç button to the
IN-
STRUMENT CLUSTER submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
TIME SETTINGS – HOURS .
The selection marker is on the hour set-
ting.
̈ Press æ or ç to set the hour.
Set time (minutes)
̈ Move the selection marker with
the æ or ç button to the
IN-
STRUMENT CLUSTER submenu.
̈ Press button j or k repeatedly
until you see this message in the dis-
play:
TIME SETTINGS – MINUTES .
The selection marker is on the minute
setting.
̈ Press æ or ç to set the minutes.
Function Page
Set time (hours) 118
Set time (minutes) 118
Select time display mode 119
Select temperature display
mode 119
Select speedometer display
mode 119
Select language 120
Select display (speed display or
outside temperature) 120
S203 MY03_A.book Page 118 Tuesday, January 28, 2003 2:22 PM