MicroNet Technology SP5530 - Manual (Page 23)

- 20 -
- Location: When you have saved the position in the camera, select the
location from the pull-down list, and then click Apply. The camera lens will
move to the location immediately.
Motion Detection
Click the Motion Detection item of the Video submenu to bring up the following
screen for setting up the motion detection settings of the camera.
- Motion: Check this option to enable motion detection function of your
camera. Once enabled, you can set up the detecting region by giving a
name for the respective Zone# (#: 1/2/3). Then, build the Zone window(s)
using your mouse to set up the detecting area(s). In addition, move the
slide bars to adjust the Sensitivity level and Percentage level for detecting
motion to record video or to send e-mail.
- Open MSD: Click this button to bring up a dialog window listing the
detected motion event(s) of Zone # (#: 1/2/3).