M-AUDIO Computer Drive - Manual (Page 4)

5
USB Audio Series Quick Start Guide Fast Track Pro
English
3. Double-click the “Open Me” icon to launch the driver selector shown below.
4. Select your product from the list on the welcome screen then click “Install Drivers.”
5. The driver installer will launch. Follow the on-screen direction prompts.
6. When the installer has completed the installation, click “Close.”
7.
Connect your USB Audio interface using the cable provided and power it on.
8. Your USB Audio interface is now ready to use.
Connecting Your Equipment to the USB Audio Series Interface
< Each member of the USB Audio series interfaces has at least two outputs which can serve a number of purposes.
Regardless of the number of available outputs on your particular device, Outs 1 & 2 will always serve as your default
left and right outputs. Please connect Outs 1 & 2 to the left and right channels, respectively, of your speakers, mixer,
or other monitoring system.
< You may also connect a pair of headphones to the headphone jack on the front of the unit (if available on your model)
allowing for monitoring or pre-listening in private.
< The inputs on the USB Audio interface accept line-level signals, such as those from keyboards, mixers, and CD
players. Some of the USB Audio interfaces also feature 1⁄4” and XLR jacks which will accept instrument and mic level
signals for recording from sources such as vocal microphones, guitars, and basses.
For more detailed information and an explanation of all available inputs and outputs, including digital formats, please refer
to your product’s User Manual located on the USB Audio Driver CD.