MIDLAND ER102 - Manual (Page 8)

Model ER102 Owner’s Manual
Page 8 www.midlandradio.com
Setting the Alarm Clock
• Press and hold down the ALARM button.
• While holding the button, use the HR button to adjust the hours. The radio will automat-
ically switch from AM to PM as you scroll through. Release the HR button when desired
hour is found.
• While still holding the ALARM button, use the MIN button to adjust the minutes.
Releasing the button when finished will store the alarm clock settings into the memory.
Activating/Deactivating the Alarm Clock
• To activate the alarm clock, press the ALARM ON/OFF button. An Alarm indicator will
be displayed on the LCD in the upper right hand corner when the alarm is activated.
• To deactivate the alarm clock, press the ALARM ON/OFF button. The Alarm indicator will
disappear, signaling the alarm has been deactivated.
Using the Thermometer and Freeze Alert
• The Temperature will automatically be displayed on the LCD when the unit is powered on.
• To adjust the temperature reading from Celcius to Fahrenheit, press the C/F/FREEZE
ALERT button to switch between Celsius and Fahrenheit readouts.
• When the temperature dips below freezing, the radio will emit a continuous beeping to
let you know this. Press the C/F/FREEZE ALERT button to turn the beep off.
Using the Earphone Jack
Plug in a set of earphones (not included) of your choice that have a 1/8 inch mono or
stereo plug. When using earphones the built-in speaker will be switched off automatically.
Note: Stereo earphones will work and sound will be heard from both sides, although
the sound is not stereo.
Operation Guide Continued... Operation Guide Continued...