Miele DG 4088 - Manual (Page 46)

,
WARNING - Read all instructions
before installation or use of the
steam oven to prevent injury and
machine damage.
~
Before installation make sure that
the voltage and frequency listed on the
data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
~
Installation, repair and maintenance
work should be performed by a Miele
authorized service technician. Work by
unqualified persons could be
dangerous and may void the warranty.
~
Before installation or service,
disconnect the power supply to the
work area by removing the fuse,
"tripping" the circuit breaker or
switching off the power main. Ensure
that power is not restored to the
appliance during maintenance or repair
work.
~
Do not use an extension cord to
connect this appliance to electricity.
Extension cords do not guarantee the
required safety of the appliance, (e.g.
danger of overheating).
~
Do not operate any appliance with a
damaged cord or plug or if the
appliance has been damaged in any
manner. Return the appliance to the
nearest authorized service facility for
examination, repair or adjustment.
~
Inspect the steam oven for shipping
damage. Do not install or operate a
damaged unit. Contact the place of
purchase.
~
The steam oven should be installed
at a safe height for users to safely
access all cooking levels and
containers.
~
This equipment is not designed for
maritime use or for use in mobile
installations such as recreational
vehicles or aircraft. However, under
certain conditions it may be possible for
an installation in these applications.
Please contact the nearest Miele dealer
or the Miele Technical Service
Department with specific requirements.
IMPORTANT SAFETY INSTRUCTIONS
46