Miele KM 403 - Manual (Page 11)

Laying out the support bars
and clamps
a Clamps
b Support bars
This illustration shows the layout for 3
combisets, their respective support
bars,
b, and the 14 spring clamps, a,
required for correct installation.
If more than 3 combisets are being
installed, add an additional 11
3
/
8
" (288
mm) to the overall width of the cut out
for each extra combiset, or use the
table on the preceeding page.
c Slight gap between support bar and
countertop.
Installation
11