Radio cd player, English – Philips Magnavox AZ2750 User Manual
Page 11
English
RADIO
CD PLAYER
11
RADIO RECEPTION
1. Press POWER to on position.
2. Press TUNER source button.
– The TUNER indicator lights up.
3. Adjust BAND to select the desired FM/ AM waveband.
4. Tune to a radio station using the tuning knob.
– For
FM, pull out the telescopic antenna. Incline and turn the
antenna. Reduce its length if the signal is too strong (very
close to a transmitter).
– For
AM, the set is provided with a built-in antenna so the
telescopic antenna is not needed. Direct the antenna by
turning the whole set.
5. Adjust the sound using VOLUME and DBB.
6. Press POWER again to switch off the set.
– The TUNER indicator goes out.
DISPLAY INDICATION FOR CD FUNCTIONS
CD door open
d1SC
CD inserted
– In stop mode
total track number and total playback time
– During CD
playback
elapsed playback time of current track and
current track number
– PAUSE
elapsed playback time freezes and flashes
when CD program active;
also appears briefly when you store a track
no SEL
program activated but no tracks selected
program cancelled/ PROG pressed for more
than 2 seconds
no d1SC
no disc/error in CD operation or with the
CD (see Troubleshooting)
FULL
program memory full
– SHUFFLE/ REPEAT
modes
when the respective mode is activated
CD
CD
CD
AZ 2750 /17
page
11
SHUFFLE
CD
REPEAT
TUNER
SHUFFLE
REPEAT
CD
STOP
SEARCH
PLAY/PAUSE
BAND
TAPE
PROG
FM
MHz
88
•
92
•
96
•
100
•
104
•
108
MHz
FM
B
MW
KHz
530
600
700
AZ2750 CD RADIO CASSETTE RECORD
E
TUNER
SHUFFLE
POWER
CD
DBB
XP AZ 2750/17 8/18/00 9:19 AM Page 11