Maytag HRE21250PC - Manual (Page 30)

30
Service and Maintenance (cont’d)
15. Reconnect the two wires to the element and then check
to make sure the high limit remains firmly against the
surface of the tank.
16. Upper High Limit Only - Replace terminal cover on
high limit making sure that the locking tabs on the ter-
minal cover are in place.
17. Press the insulation pad back in place so that it complete-
ly covers the thermistor, upper high limit and element.
18. Replace access panel.
19. Turn “ON” electric power to water heater.
Element Cleaning/
Replacement (cont’d)