Metra Electronics 95-8903B - Manual (Page 4)

95-8903B KIT ASSEMBLY
A
B
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation. 1
Attach the Double DIN brackets to the
Double DIN trim plate.
(Figure A)
2
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the assem-
bly using the screws supplied with
the radio. (Figure B) 3
Reassemble dash in reverse order of
disassembly. 4
2010 SUBARU LEGACY / OUTBACK
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS