Nesco BG-88PR - Manual (Page 5)

3
E
n
g
li
s
h
Plug cord into 120 volt electrical outlet. If it does not fit, rotate plug
180°, if it still does not fit contact a certified electrician.
Press and release the On/Off switch. The coffee grinder will start,
the beans will begin to fall between the grinding wheels and the
ground coffee will be ejected into the grounds bin.
When the coffee grinder stops, press the On/Off switch and
remove plug from electrical outlet.
If you need to grind more coffee, please wait one minute before
reusing.
Clean the grinder after each use. Coffee left over can become stale
and get mixed in with the next batch.
Caution
After one minute of use (12 Cups), let the grinder cool for one
minute before reusing.
Do not operate more than 2 minutes at one time.
Before cleaning, turn the timer to “0” (off) and press the On/Off
switch then remove plug from electrical outlet. It is now ready to be
cleaned.
The grinding wheels are fixed and cannot be removed.
Other than cleaning, no additional maintenance or servicing of
this appliance is required. Repairs, if needed, should be sent to
authorized service center.
Care and Cleaning
Clean the inside of the bean hopper and grounds chute with a soft
brush, such as pastry brush.
The hopper lid and grounds coffee bin may be washed in soapy
water. Rinse and dry before use. NOTE: Do not put items in
dishwasher.
Clean the outer surfaces of the coffee grinder with a soft damp
cloth.
Never immerse or rinse the body of the coffee grinder in water or
other liquid.
Do not use harsh or abrasive cleaners or solvents to clean
appliance.
8.
9.
10.
11.
12.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.