Metra Electronics 95-7321 - Manual (Page 6)

4
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation. 1 A
Attach the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A) 2
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
assembly using the screws supplied
with the radio. (Figure B) 3
Reassemble dash in reverse order of
disassembly. 4
DOUBLE DIN / STACKED ISO DIN
HEAD UNIT PROVISION
B
95-7321
KIT ASSEMBLY