Miller Electric OM-234 016D - Manual (Page 29)

OM-234 016 Page 20
C. Weld Parameter Chart For Millermatic 140 Model w/Factory Set Non-Wire Speed Tracking Mode
.
Color parameter charts can be downloaded from www. MillerWelds.com or
by ordering from a Miller distributor.
1. Number on left of
slash is Voltage
Knob Setting.
(Example: 4.5/55)
2. Number on right
of slash is Wire
Speed Knob Setting.
(Example: 4.5 / 55 )
Refer to chart below to select Voltage and Wire Speed based on
thickness of material being welded.
Solid Wire
ER70S−6
(DCEP)
Solid Wire
ER70S−6
(DCEP)
Flux Core
E71T−11
(DCEN)
Stainless
Steel
(DCEP)
Selecting Wire, Gas and Control Settings for Aluminum
.030” (0.8 mm)
.035” (0.9 mm) Aluminum w/
Opt. Spool Gun Aluminum
4043ER
100% Argon