Miller Electric XMT 350 VS - Manual (Page 6)

Protective Cover
#195 478
Mildew and water
resistant, odor-free
cover protects your
machine’s finish.
For 300/350 A
inverters: XMT,
Maxstar and
Dynasty.
Inverter Racks
Four or Six-Arc Welding System
The Inverter Rack conve niently houses
multiple XMT power sources for multiple
welders. Both 4-pack and 6-pack models
are available.
Features include:
Provision to parallel power sources or
common work connections
Two lifting eyes for transportation
Rugged skids for dragging or pushing
Customer can install up to a maximum
of four XMT 450 CC/CV power sources
For detailed information on customized
Inverter Rack systems see Lit. Index No.
DC/18.81.
Wire Feeders/Guns
SuitCase ® X-TREME ™ 8VS #951 181
SuitCase ® X-TREME ™ 12VS #951 184
Lightweight, portable wire feeder for a
variety of wires up to .062 inch. Holds up
to an 8-inch (8VS) or 12-inch (12VS) spool
of wire. Operates on open-circuit voltage
eliminating the need for a control/power
cord. See Lit. Index No. M/6.41.
SuitCase ® 8RC #951 186
SuitCase ® 12RC #951 188
Lightweight, portable wire feeder for a
variety of wires up to .062 inch. Holds up
to an 8-inch (8RC) or 12-inch (12RC) spool
of wire. Operates using 14-pin control
receptacle. See Lit. Index No. M/6.5.
XR ™ -S Control #300 601
XR ™ -D Control #300 678
The updated XR Controls offer unsurpassed
performance and reliability for feeding
aluminum and other difficult-to-feed wire
types. Models include .035-inch and
factory-installed 3/64-inch drive rolls. See
Lit. Index No. M/1.7.
XR-AlumaFeed ™
#300 509
Advanced push-pull wire
feeder designed for high-
volume, high-production
aluminum MIG welding
where quality and consistency is a high
priority. See Lit. Index No. DC/34.
70 Series
S-74S
#951 196
S-74D #951 198
S-74DX #951 200
Features Posifeed
™
wire drive assembly
and handles a variety of wires up to 1/8 inch.
Comes with FREE Bernard
® Q ™ -Gun. Dual-
wire models also available. See Lit. Index
No. M/3.0.
Extension Cables*
#247 831 025 25 ft. (7.6 m)
#247 831 050 50 ft. (15.2 m)
#247 831 080 80 ft. (24.4 m)
Eleven conductors to support contactor
control and remote voltage control on all
Miller electronic CV 14-pin power sources.
*Custom lengths available in 5-foot increments up to
50 feet and 10-foot increments up to 100 feet.
Spoolmatic ® 30A #130 831
A one-pound, air-cooled spool gun that
extends the weld process range by adding
a handy portable system for small wire
MIG. Rated 200 amps at 100% duty cycle.
Includes 30-foot (9.1 m) cable assembly.
WC-24 (#137 549) required for use with
14-pin receptacles, order separately.
Ironmate ™ Flux Cored Guns
See Lit. Index No. AY/16.0.
FC-1260
#195 732 10 ft. (3 m)
#195 729 15 ft. (4.6 m)
FC-1260LM
#194 912 10 ft. (3 m)
#194 911 15 ft. (4.6 m)
FC-1150
#194 864 10 ft. (3 m)
#194 863 15 ft. (4.6 m)
6
Genuine Miller ® Accessories
(continued)