Monte Carlo Fan Company 5OR52XXD - Manual (Page 5)

Tighten keeper nut onto threaded
pipe from the light kit.
31
Install 3 x 60 watt Candelabra base
bulbs.
32
Locate blue and white wire from the fan
marked “For light kit”. Connect blue from fan
to black from light and white from fan to white
from light by pushing connectors together.
33
Install finial cap and finial nut to
glass and tighten finial nut.
37
Attach switch cap to fan by lining up
2 slot ear holes and 1 screw hole and
twisting cap. Then tighten the 3
screws.
34
Install rubber washer and hex nut to
glass tighten nut.
36
Remove finial nut, finial cap, hex nut,
and washer from fitter.
35