beautypg.com

Menu operation (continued) – MITSUBISHI ELECTRIC XD210U User Manual

Page 18

background image

EN-18

Menu operation (continued)

5. Setting menu

6. Language menu

7. Factory Default menu

Menu option

Setting

Feature description

Menu Position

5 options

Choose the menu location on the display screen.

Mounting

4 options

Adjust the picture to match the orientation of the projector: upright or
upside-down, in front of or behind the screen. Invert or reverse the
image accordingly.

Logo

On, Off

Choose to display the logo or not.

Signal Type

RGB

For VGA signal

YCbCr/YPbPr

For Component I,P signal

Lamp Time

Display the lamp's elapsed operating time (in hours).

The displayed lamp time is based on low lamp mode setting.

(The lamp lifetime is 3000 hours.)

Lamp Time Reset

Yes, No

Reset the lamp time to 0 hours.

Auto Power On

Yes, No

When this mode is set to Yes, the lamp is automatically lit when the
power cord is plugged in the wall outlet. Select Yes when you set the
projector at the ceiling.

When the lamp is off, the projector is in standby. Use the remote
control to turn on the lamp.

Auto Power Off

No, 5-60 Min.

Selects a desired timer setting until the projector enters the standby
mode when there is no signal input from the source.

Auto Source

Yes, No

Automatically scan the input source.

Lamp Mode

Standard

Select this setting when you want to view images in a well-lit room.

Low

Select this setting when you want to view images at a moderate light
intensity. The operating sound is consequently reduced, and the lamp
lifetime becomes longer.

When this mode is switched, projected images may flicker.

If this mode is frequently switched, the lamp may be deteriorated.

The default setting is Standard when shipment.

The Lamp Mode cannot be switched for about 1 minute after the
lamp is on.

OSD Timeout

5 - 60 sec

Duration OSD menu stays active (at idle state by second).

Menu option

Setting

Feature description

Language

11 languages

Select the language used by the on-screen menu.

Menu option

Setting

Feature description

Factory Default

Yes, No

Restore all menu settings to factory default settings.

This manual is related to the following products: