Miele F1811SF - Manual (Page 22)

Moving the shelves
The shelves can be adjusted according
to the height of the food.
^ Using both hands, grasp the shelf
from underneath and lift slightly so
that the rear of the shelf is slightly
above the mountings.
^ Pull the shelf forward.
^ Move the shelf to the desired height,
then insert the (rear) hooks into
place.
^ Make sure the shelf is level.
Adjusting the door shelves
For easier loading, unloading, and
cleaning, the door shelves can be
shifted or completely removed.
^ Using both hands, grasp the door
shelf by the frame and tip it slightly
forward.
^ Slide the tipped shelf up or down
along the slide-rails, and click it into
place with the lower hooks.
^ Make sure the shelf is level.
Removing a door shelf
^ Slide it upward all the way to the top
of the slide-rails, until it can be
removed.
Replacing a door shelf
^ Start at the top of the slide-rails and
slide the shelf down into the desired
position.
Freezer baskets
For easier loading, unloading, and
cleaning, the freezer baskets can be
shifted or completely removed.
^ Pull the basket forward until
resistance is felt.
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
^ Using a suitable object, e.g., coin,
turn the safety lock to a horizontal
position
a.
^ On both sides of the basket, pull the
latches b upward and lift the basket
out of the freezer.
Replacing the freezer basket
^ Fully extend the telescopic tracks.
^ Lay the basket onto the tracks so that
it connects in the front and back.
^ Turn the safety lock back to the
vertical position.
^ Slide the freezer basket in.
Adjusting the interior fittings
22