Majestic Regal Group Designer Series DVRTSB - Manual (Page 4)

YOUR DEALER
HA013-1000-9185
The Regal Group Designer Series Direct Vent Gas Fireplaces
Models • 360DVS2 • 360DVS3 • 360DVSL/R • DVRTSB
© 2008 CFM Corporation - All rights reserved. Majestic ® Fireplaces is a registered trademark of CFM Corporation.
In the interest of constant product improvements, we reserve the right to change specifications without notice.
Before installations, please read Installation Instructions and check all local Building Codes and Gas Regulations.
Please see your Dealer or visit www.majesticproducts.com for complete warranty information.
Printed in Canada
NOTE 1: 24” Minus two times finishing material thickness to be even with face of unit
NOTE 2: 24 3/4” Minus one time finishing material thickness to be even with face of unit
360DVS2
Models 360DVS3 / 360DVSR / 360DVSL
DVRTSB
Framing Dimensions
Ref. Rear Vent Configuration Top Vent Configuration
ROD 24” Minus two times finishing material thickness to be even with face of unit
ROH 981 mm (38 5/8”) Not to be framed until unit is set in place
due to 3 1/8” allowance for flue collar
ROW Not to be framed until unit is set in place 1111 mm (43 3/4”)
due to 3 1/8” allowance for flue collar
Framing Dimensions
Ref. Rear Vent Configuration Top Vent Configuration
MODEL 360DVS3 360DVSL/R 360DVS3 360DVSL/R
ROD See Note 1 See Note 2 See Note 1 See Note 2
ROH 981 mm 38 5/8” Not to be framed until unit is set in place due to
3 1/8” allowance for flue collar
ROW 40 5/8” Minus one time finishing material thickness to be even with face of unit
HA013_1000-9185_MJ_Rgl_Dsgnr.qxd:Final2007Template_Vermont_CastingsREVSteph.qxd 4/18/08 12:07 PM Page 4