Mach Speed Technologies V5000 - Manual (Page 11)

10
Inserting and removing the Micro SD card
Inserting: Ensure that the player is powered off, and disconnected from the
computer. Hold the Micro SD card face up (side with words) (with the direction of
the display screen as the face), and slide the card into the socket on the player,
slightly past flush. When you hear the card click into place, you can access the
Pulling: Ensure that the player is powered off, and push the SD card just past
flush. When you hear the click, release pressure, and the card will slide out.
Caution: Please ensure that the power is off when you connect or disconnect your
SD card, or damage may occur to the player or your card.
Use only the authorized power adaptor or your computer’s USB port. Use of an
unauthorized charger will lessen the battery life of the device, and often damage
the player.
Loading Files to your Player
Using Windows Media Player
(Note: you must use Windows Media Player 10 or later to use this feature.)
(Note: this player does not support DRM encrypted audio or video files, such as
those downloaded from the Windows Media Player “Overdrive” download
service.)